Wizard Research USB Heated Eye Mask

About the Product

A USB powered heated eye mask with a graphene heating element and a removable, washable 100 percent cotton cover. It is supplied with a UL approved USB wall adapter and a controller with a display, and the mask has 10 heat settings and a countdown timer with automatic shut off.

This is the corded warm compress category, used at home in place of a microwaved pad. The mask runs from a USB wall adapter, power bank or laptop, holds a selected setting between 99 and 117 degrees Fahrenheit, and is worn over the closed eyelids for 10 minutes in the morning and 10 minutes in the evening. For moist heat, the cover is lightly sprayed with water before use.

Materials

• Graphene heating element The heat source inside the mask.
• 100 percent cotton cover The removable, washable layer that sits against the skin.

What Is Included

• Electric heated eye mask
• Controller with display
• UL approved USB wall adapter
• 100 percent cotton protective cover

Specifications

Power	USB powered. Use the included UL approved USB wall plug. Only use replacement plugs rated 5V 2A, 10W. Rated for 110V and 220V use
Heat settings	10 settings, adjustable from 99 to 117 degrees Fahrenheit, which is 37 to 47 degrees Celsius
Timer	Built in countdown timer with automatic shut off and selectable durations

How to Use

1. Plug the cable into the included wall adapter and insert the adapter into a standard electrical outlet.
2. Ensure the wire is on your right side when wearing the mask.
3. Press the POWER button on the controller.
4. Start at a lower setting and increase gradually. Use heat levels that feel soothing and comfortable. If the mask feels too hot, reduce the setting immediately.
5. For moist heat, lightly spray the mask cover with water before use.
6. Place the mask over the closed eyes and adjust the strap securely.
7. Use for 10 minutes in the morning and 10 minutes in the evening.

Care and Cleaning

Mask cover. Hand wash with mild soap and water and air dry completely.

Mask. Wipe with a damp cloth. Do not submerge the mask in water.

If the mask is accidentally submerged, unplug it immediately and allow it to dry fully before reuse.

Warnings

• If the mask feels too hot, reduce the setting immediately. Start at a lower setting and increase gradually.
• Do not bend the mask in half, as this may damage the heating element.
• Do not use for at least 14 days after any eye surgery.
• Never submerge the mask in water. If it is accidentally submerged, unplug immediately and allow it to dry fully before reuse.
• Ensure the wire does not become tangled or wrap around the neck.
• Keep out of reach of children and pets.
• Always use the included UL approved USB wall plug. Only use replacement plugs rated 5V 2A, 10W.